KBL MegaSun 7000a, Руководство по эксплуатации

Страница: 12 / 52

O p e r a t i n g I n s t r u c t i o n s | megaSun 7000/7800 alpha
12
Connections - Audio
For information on further tanning
device connections, refer to your
ASSEMBLY INSTRUCTION in the sec-
tion “
Connections & Initial operation”.
Level adjustment studio music
signal
The voice / audio system components are built in the
middle of the bench part (vacuum housing) of the
tanning device. The potentiometer which serves of
the external audio signal is located on the left side
of the housing. To avoid overdrive, select the level
adjustment accordingly. The level setting depends
on the strength of the external signal and should be
carried out by a service engineer. Adjustment of the
sound level can only be conducted in the service
menu.
Operation using different
audio sources
The audio source can be changed via the interior
control panel.
The tanning device can be operated using the
following audio sources:
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.
EXTERNAL AUDIO SOURCES
LINE-IN
As an external audio source, you can connect
devices ranging from the standard-line level to low
loudspeaker levels.
These sources comprise:
• Studio music
• External players such as MP3 players, mobile
phones (cell phones), I-pods, etc.
EXTERNAL 100 V AUDIO SIGNAL ON STUDIO
CHANNEL (OPTIONAL FEATURE)
If you decide for a connection to a 100 V audio
system, you will need a transformer (KBL no.: 9100
0170 00) for the transmission of the audio signal.
This connection must be made by trained and
authorised personnel.
EXTERNAL PLAYERS & HEAD-/EARPHONES
A line connection has been integrated on the right-
hand side of the bench’s head end so that the tan-
ning device user can connect his or her own player
such as an MP3 player, an iPod, etc. Take hold of the
jack plug and pull the cable out of the opening. Then
connect the jack plug to the earphone jack of your
player. Then select ”MP3 ext.” as the audio source
from the interior control panel of the tanning device
before you start playing your own tracks from the
player.