A s s e m b l y I n s t r u c t i o n s
|
6808 /7908
41
6.3 Connecting the channel
selection
The following diagrams show the wiring of the chan-
nel selection on the audio equipment’s side, for pulse
coding as well as for BCD coding.
CHANNEL
BCD 0
BCD 1
BCD 2
1
0
0
0
2
1
0
0
3
0
1
0
4
1
1
0
5
0
0
1
6
1
0
1
7
0
1
1
8
1
1
1
6.4 Level adjustment studio
music signal
The voice / audio system components are built in the
middle of the bench part (vacuum housing) of the
tanning device. The potentiometer which serves of
the external audio signal is located on the left side
of the housing. To avoid overdrive, select the level
adjustment accordingly. The level setting depends
on the strength of the external signal and should be
carried out by a service engineer. Adjustment of the
sound level can only be conducted in the service
menu.
6.5 Connecting the external
timer
Connect the external timer (coin box, studio control)
according to the instructions supplied with the timer.
The following diagram shows the wiring requirements
with regard to the timer. The door contact is required if
you have opted for the booth-scenting feature.
