M a n u a l e o p e r a t i v o
|
megaSun 4000 / 4500
38
Canopy drive
REGULAR MAINTENANCE
Check and maintain the drive rope after each
tube replacement in order to ensure a trouble-free
operation of the drive.
•
Check the canopy drive: the canopy must stop
in all positions. If not, the canopy spring must be
tensioned.
•
Should individual rope wires be spliced, replace
the rope immediately!
•
Use the spray lubricant HHS 2000 to grease the
rope in the area of the return pulley.
REPLACING THE SPRING ROPE
Procedure
Fig.
1
Close the canopy.
2
Remove the front cover of the base
section.
37.1
37.2
3
De-tension the spring. Remember
the position of the nut at the spring
tensioner.
38.1
4
Remove the cover of the return pulley. 38.2
5
Remove the upper rope cover.
38.3
6
Undo the dowel screw of the upper
rope holder. Do not forget to remember
the position of the screw within the
seat opening
(fi gure 39.3, zoomed).
38.3
7
Replace the old rope and fasten the
new one.
9
Tension the spring in such a way that
the canopy stops in all positions.
38.1
10
Grease the rope in the area of the
return pulley.
38.2
11
Fasten all covers.
Figure 38.1: Spring tensioner in the base section (right-hand side)
Figure 38.2: Return pulley area with and without cover
Figure 38.3: Upper rope holder with and without cover
