KBL megaSun 3000 Hybrid Thunder, Руководство пользователя

Страница: 34 / 52

M a n u a l e o p e r a t i v o | megaSun space 3000 & hurricane & Thunder Hybrid
34
Sets the transmission power for bluetooth.
Factory setting: 4
>
> 1 .. . 7
SERVICE\BLUETOOTH 02/02
Powerlevel
Submenu call with START/ENTER. Displays the
current firmware typ / variant.
SERVICE 04/11
FIRMWARE-TYP
> press enter
Submenu call with START/ENTER. Displays the cur-
rent firmware version of the system components.
Do not operate the system with different
firmware versions!
• All system components must be equipped
with an identical firmware version.
SERVICE 05/11
FIRMWARE-VERSIONS
> press enter
Submenu call with START/ENTER. Displays the first
and the last Software-Upload.
SERVICE 06/11
SOFTWARE UPLOAD
> press enter
Not available in this system.
>
SERVICE 07/11
RGB-Setup
SERVICE 08/11
SERVICE MODE
> press ENTER
Submenu SERVICE MODE.
Invoked by pressing
START (ENTER).
SUBMENU
SERVICE MODE
Service mode without tanning
Service mode with tanning
Troubleshooting mode.
The service mode is switched on for 30 minutes.
The mains voltage is connected. Error notifications
are ignored, but tanning cannot be started.
SERVICE 01/02
Service mode without tanning
> Start: press `ENTER` for 2s
Troubleshooting mode.
The service mode is switched on for 10 minutes.
The mains voltage is connected. Error notifica-
tions are ignored, tanning can be started. After this
period, there is a 3 minute restart lockout.
SERVICE 02/02
Service mode with tanning
> Start: press `ENTER` for 2s