KBi KAPower Starting Module, Руководство по установке и эксплуатации

Страница: 6 / 20

6
INSTALLATION :
The KAPower KSM is a product of high electric power. Avoid shorting
module terminals! A brief, short circuit will not cause product failure, how-
ever, it may result in burning or igniting of combustible materials adjacent to the point of
short circuit.
IMPORTANT!
Remember, Electrical Resistance in the circuit created is the consumer of the electrical
energy in your KAPower Module. Keep the resistance to an absolute minimum. Short,
heavy cables and good, clean cable connections are essential!
When selecting a location for installation, make sure that the KAPower KSM
module will clear any lids and other movable parts. Install the KAPower KSM
module as close to the engine's starting batteries or starter as possible. Avoid
locations that are subject to extreme heat, humidity, dripping water (under deck
ventilation systems aboard boats for instance), road dirt, ice and snow. Prevent the
external case of the KAPower KSM module from physical impacts.
Visually inspect the external case prior to mounting the module. Make sure that no traces
of physical impacts are present on the external case of the KAPower KSM module.
DO NOT remove the external plastic case cover of the KAPower module
located within the KSM enclosure. DO NOT short circuit terminals.
Before installation, familiarize yourself with the specifications of your KAPower KSM
module. Insure that you have the proper device for your application.
CAUTION
WARNING
WARNING