The closer the wiring is to the power cabinet, the lower the wiring cost is.
Keep the air-conditioning return air away from direct exposure to the sun in the room.
Be careful not to interfere with the light tank, fire pipe, gas pipe and other facilities.
The wired controller and the IDU should be in the same installation space; otherwise, the sampling point
setting of the wired controller needs to be changed.
Well ventilated.
Unobstructed airflow.
Strong enough to bear the weight of the indoor unit.
Ceiling has no obvious slant.
There is sufficient space for repair and mainrenance work to
be carried out.
No leakage of flammable gas.
The length of the piping between the indoor and outdoor
units is within the permitted range (refer to the manual on
installation of the outdoor unit).
Space required for installation (unit (mm)):
Incorrect positioning or installation may increase the noises
and vibration of the unit during operation.
If not enough space is reserved during installation, the unit
may face difficult maintenance and reduced performance.
The unit allows vertical installation, provided that correct
positioning is arranged in advance. As shown below, a is
greater than 150 mm, b is between 90 and 100 mm, c greater
than 50 mm and d greater than 1500 mm.
The footings shown in are opt ional. You can purchase them
separately.
For installations with field applied mechanical joints which are
exposed in the occupied space, the instructions shall state
that a sensor shall be located.
Remote located within 2 m horizontal distance in line of the
until and on a wall within the room in which the unit is installde;
and 100 mm above the floor .
Choose a site that fully complies with the following conditions and user requirements to install the air
conditioning unit:
15
Installation
a
a
d
a
a
90
c
d
a
a
b
b
d
Uncovered product
Footing
Содержание KSEF-22 DN5.0
Страница 60: ......
