Kaysun KID-02.1 S, Руководство пользователя

Страница: 9 / 16

7
4.3. Dehumidifying operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing
.
1.
Press the MODE button to select DRY mode .
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 17ºC~ 30ºC in 1ºC
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE
In the Dehumidifying mode, you can not switch the fan
speed. It has already been automatically controlled
.
4.4. Timer operation
Press the TIMER ON button can set the auto-on
time of the unit. Press the TIMER OFF button can
set the auto-off time of the unit
To set the Auto-on time.
1. Press the TIMER ON button. The remote
controller shows TIMER ON, the last Auto-on
setting time and the signal "H" will be shown on
the LCD display area. Now it is ready to reset
the Auto-on time to START the operation
.
2. Push the TIMER ON button again to set
desired Auto-on time. Each time you press the
button, the time increases by half an hour
between 0 and 10 hours and by one hour
between 10 and 24 hours.
3. After setting the TIMER ON, there will be a one
second delay before the remote controller
transmits the signal to the air conditioner.
Then, after approximately another 2 seconds,
the signal "h" will disappear, and the set temperature will re-appear on the
LCD display window.