Kaysun KID-02.1 S, Руководство пользователя

Страница: 5 / 16

3
DOWN Button
Push this button to decrease the indoor temperature setting in 1oC
increments to 17oC.
9-
SILENCE/FP Button
•
Active/Disable SILENCE function. If pushing more than 2 seconds, the FP
function will be activated, pushing more than 2 seconds again to disable
“TIMER ON” Button : Press this button to initiate the auto-on time
sequence. Each press will increase the auto-timed setting in 30 minutes
increments. When the setting time displays 10H, each press will increase
the auto-timed setting 60 minutes increments. To cancel the auto-timed
program, simply adjust the auto-on time to 0:0.
•
When the Silence function is activated, the compressor will operate at
low frequency and the indoor unit will bring faint breeze, which will
reduce the noise to the lowest level and create a quiet and
comfortable room for you. Due to low frequency operation of
compressor, it may result in insufficient cooling and heating capacity.
•
The FP function can only be activated during the heating operation
(only when the setting mode is HEAT). The unit will operate at a
setting temperature of 8
O
C. The display window of indoor unit will
display FP. Press the buttons of ON/OFF, SLEEP, FP, MODE, FAN
SPEED, UP or DOWN while operating will cancel the FP function.
10-
TIMER ON Button
Press this button to initiate the auto-on time sequence. Each press will
increase the auto-timed setting in 30 minutes increments. When the
setting time displays 10.0, each press will increase the auto- timed
setting 60 minutes increments. To cancel the auto-timed program, simply
adjust the auto-on time to 0.0.
11-
TIMER OFF Button
Press this button to initiate the auto-off time sequence. Each press will
increase the auto-timed setting in 30 minutes increments. When the
setting time displays 10.0, each press will increase the auto-timed setting
60 minutes increments. To cancel the auto- timed program, simply adjust
the auto-off time to 0.0
12-
Swing Button (applicable to KID-02.1 S)
Used to stop or start vertical louver movement and set the desired
left/right air flow direction
.
I he vertical louver changes 6 degree in angle for each press. For some
units, the temperature display area of indoor unit displays for one second.