8
To set the Auto-off time.
1. Press the TIMER OFF button. The remote controller shows TIMER OFF, the last
Auto-off setting time and the signal "H" will be shown on the LCD display area.
Now it is ready to reset the Auto-off time to stop the operation.
2. Push the TIMER OFF button again to set desired Auto-off time. Each time you
press the button, the time increases by half an hour between 0 and 10 hours and
by one hour between 10 and 24 hours.
3. After setting the TIMER OFF, there will be a one second delay before the remote
controller transmits the signal to the air conditioner. Then, after approximately
another 2 seconds, the signal "H " will disappear and the set temperature will re-
appear on the LCD display window.
CAUTION
•
When you select the timer operation, the remote controller automatically
transmits the timer signal to the indoor unit for the specified time. Therefore,
keep the remote controller in a location where it can transmit the signal to the
indoor unit properly.
•
The effective operation time set by the remote controller for the timer function
is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5,
5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18,
19, 20, 21, 22, 23 and 24.
Example of timer setting
TIMER ON
(Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before you
return home. The air conditioner will
automatically start operating at the set time.
Example:
To start the air conditioner in 6 hours.
1. Press the TIMER ON button, the last setting of starting
operation time and the signal "H" will show on the display
area.
2. Press the TIMER ON button to display "6.0H " on the
TIMER ON display of the remote controller.
3. Wait for 3 seconds and the digital display area will show
the temperature again. The "TIMER ON" indicator
remains on and this function is activated.
Содержание KID-02.1 S
Страница 16: ......
