ENGLISH
8
ENGLISH
Read the User Instructions carefully before use!
TECHNICAL DATA
Display of room temperature
Resetting and taring
LCD display, character height
11.3 mm
Low battery level and overload
indicators
Capacity
50 kg/110 lb
Measurement increments
50 g/0.1 lb
Power supply
1 lithium battery 3 V
USE
Buttons
: Power on/off (press and hold for 2 seconds)
: Switching between weighing and display of the room temperature
Weighing
1.
Pull the strap through the suitcase handle and hook the strap hook in the triangular ring.
2.
Make sure the strap is unloaded and press the button
button to switch to weighing mode.
3.
When 0 is displayed, press the unit button to select the weighing unit.
4.
To restart the weighing, press Z/T to reset the LCD display.
5.
Lift the scales carefully and make sure it is horizontal and balanced. The weight of the suitcase is
shown on the LCD display. Wait until the display stabilises, flashes three times and then locks. The
scales show the recorded weight for 2 minutes and then shut off.
6.
When the weight display is locked, you can press Z/T to reset the display and make a new
weighing. The product will shut off automatically after 1 minute of inactivity.
Power supply
The product is powered by 1 x 3 lithium battery (CR2032). Before using for the first time, open the battery
compartment to the right of the product and remove the insulation from the battery.
Battery replacement
Lo is displayed when the battery has discharged. Replace the battery as described below.
1.
Hold the product in one hand, open the battery compartment with your other hand and pull out the
battery holder.
2.
Press the catch A outwards to remove the battery.
3.
Press the new battery into the slot between B and C so that the catch A locks the battery. Make
sure to insert the battery with the correct polarity (see figure).
4.
Insert the battery holder and refit the cover.