ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 32 -
Removal and installation of rear shock absorber
Check the rear shock absorber whether the airbag
is normal and the spring is cracked or not,etc. If
necessary, replace the rear shock absorber.
Please follow the steps below to removing the rear
shock absorber:
1. Remove the muffler tube (see the exhaust
system inspection section for details).
2. Remove the mounting bolts of the rear shock
absorber and the frame.
3. Loosen the connecting bolts of the U-shaped
rocker arm and the triangular rocker arm (do not
remove it);
4. Remove the connecting bolts between the rear
shock absorber and the triangular rocker arm;
5. After confirming that there is no interference,
take out the rear shock absorber from the side;
Perform the Installation in the reverse order of
removal.
Removal and installation of seat cushion
The removal and installation steps of the seat
cushion are as follows:
1. Remove the fixing bolt on both sides of the rear
seat.
2. Take out the seat backwards.
3. The installation steps should be carried out in
the reverse order of removal.
