ZHEJIANG KAYO MOTOR CO., LTD.
www.kayomoto.com
- 30 -
Disassembly and installation of coupling plate
The disassembly and installation steps of the
coupling plate are as follows:
1. Remove the front shock absorber
2, remove the directional column lock nut
3. Remove the upper connecting plate
4. Remove the adjusting nut of the directional
column
5. Take out the lower coupling plate
6. Remove the directional column
Installation is carried out in the reverse order of
disassembly
Check the head steering
Check the head steering steps as follows:
1. Aerial the whole vehicle
2. By turning the handlebar left to right to control the motorcycle head, if it turns smoothly
and there is no obstruction, the motorcycle head turning is normal
3. If it is found that there is a sense of delay and obstruction, then remove the coupling plate
to check whether the steering bearing is normal
Disassembly,installation and lubrication of steering head bearing
bearing
When installing the steering bearing of the car
