kawneer.com
Laws and building and safety codes gover
ning the design and use of glazed
entrance, window
, and curtain wall pr
oducts vary widely
. Kawneer does not contr
ol
the selection of pr
oduct configurations, operating har
dwar
e, or glazing materials,
and assumes no r
esponsibility ther
efor
.
Kawneer r
eserves the right to change configuration without prior notice when deemed
necessary for pr
oduct impr
ovement.
© Kawneer Company
, Inc., 2011
4
PUSH
(PART NO. 038-371)
EC 97904-38
NOVEMBER, 2011
PANELINE
®
EXIT DEVICE
SERVICE INSTRUCTIONS
1. Dog unit down per instructions on page 2.
2. Being careful not to scratch any finished surfaces, use putty knife at each spring clip location.
3. To remove filler plate, push putty knife in far enough to engage clips and pry away from filler plate
(towards vision area).
4. Repeat steps 2 and 3 on the opposite side.
233-391
SPRING CLIPS (8)
COVER
CHASSIS REMOVAL
Figure D
Figure E
1. Only four mounting screws 028-403 need be removed to take out the chassis assembly.
2. Spring clips may need to be moved over to allow clearance for the chassis removal.
028-403
SCREWS (4)
