The following operations are available in Bar Edit:
1) Delete: deleting data (cut and paste)
The first specification applies to the range. Using the dial or the
"+" or "-" buttons you can delete each of the 16 tracks (Trk01
through Trk16), the tempo track (TEMPO), the accompaniment
(CHORD), the pattern (PTN), or the entire sequence (ALL). To
define the range to be deleted use R1 to move the mark to the
position in the bar that will be the beginning of the deleted
section, then define the second value for the end of the section.
If a track is empty, the range of bars cannot be set. The Delete
function cuts out the defined section and pulls the rest of the
track's contents to the position of the cut.
Hint: You can also use the Delete function to shift the
contents of tracks. For example, by deleting bars 001
through 003 in order to shift the phrase of bar 4 to position
001.
2) Insert: inserting data
This function allows you to insert empty bars or, as in deleting, to
shift sections of a track. You can also use this function to choose
between tracks 1 through 16, Tempo, Chord, Pattern, and ALL.
After you have made your selection, move the mark (using R1) to
the beginning (the position at which the insertion of empty bars
is to begin) and carry out the setting with the dial. The next item
concerns the end position of the inserted bars.
3) Bar Insert: inserting bar by bar
In Length you specify the number of bars to be inserted. Use L1
and L2 to move the mark to the desired track (Tracks 1 through
16, Tempo, Chord, Pattern, or ALL) and select the item. The
Sequencer
20
96
