![Kawai Z1000 Скачать руководство пользователя страница 100](http://html1.mh-extra.com/html/kawai/z1000/z1000_owners-manual_3693584100.webp)
The parameter Velocity comprises 128 steps in accordance with
the MIDI specifications. Therefore you can decrease the velocity in
the negative range by the specified value or increase it in the
positive range by the corresponding amount. This setting causes
changes both in the volume and in the timbre of the
corresponding instrumental voice. Select the track and the range
of bars on the line "at" (L1/R1) and input the value under
"modify" (L2).
9) Gate Time Modify
Gate Time is the specified note length in the recorded sequence.
Input the track and the range of bars for editing as usual on the
line "at". The parameter Modify allows you to make changes in
the lengths of the recorded notes in the form of percentages. Any
change made applies to all notes and makes it possible to
shorten or extend the lengths by the specified percentage. 100%
means that there is no change to the note length; values of less
than 100% shorten the notes, values of more than 100% lengthen
them.
Hint: if you intend to unify the note lengths of a track, you
can use the Gate Time changes in several stages: first you
shorten all note lengths to the minimal value (10% - if
widely differing note lengths occur, you may have to press
Execute several times). Then you lengthen the entire track again
with a new Gate Time. In this way you obtain identical lengths for
all notes of the track. It may be necessary to repeat the
lengthening procedure several times, since the maximum
lengthening by 30% does not lead to a significant change for
notes that have been shortened to the minimum.
Sequencer
20
100