3
33
33
Page41... Change of SYSTEM MENU parameters list
[System Parameter]
System Channel
Init. SW
Touch
System Tune
Volume Slider Action
Local Control On/Off
Multitimbre On/Off
System Channel Mode (*Addition)
Receive Channel On/Off
LCD Contrast
LED Brightness
Out Mode
Foot SW
Wheel Mode (*Addition)
Page44... Insertion the explanation of System Channel Mode
8.2.7.1 System Channel Mode
(*Addition)
This parameter determines whether or not MIDI data received on the system chan-
nel will be sent to panel section (4zone setup internal section) when MultiTimbre is
set to ON. When the Multi-Timbre Mode is set to Off, this page won’t be displayed.
Panel: MIDIdata received on the SystemCh is sent to panel section (Default).
Use this setting to play your sound and setup patches (including effect/reverb
settings) via MIDI on the system channel in Multi -Timbral mode.
Normal: The system channel receives MIDI data as part of a simple 16 part Multi
-Timbral set up. When Normal is selected Sound and setup patch settings will
not be used via MIDI.
When the Multi-Timbral Mode is set to Off, this page won’t be displayed.
6.3.9 Master Volume
Adjusts the total volume of the SETUP.
The value changes from 0 to 127.
