Step 2:
IMPORTANT:
1.
Set the playback tempo of your sequencer to 70 BPM, because
any higher tempo may course data loss.
When using MediaPlayer this is not needed.
2.
Turn off your screen saver!
3.
Never interrupt the transmission of data.
Step 3:
Start the playback. (MediaPlayer automatically starts after you
loaded the MIDI file.) The MP8 display shows first ERASE and
then “Data Packet” with a hex counter running. After the
transmission “End of File” appears. The whole transmission may
take a few minutes.
Step 4:
Turn off the MP8 and ON again. Done. To check the version
number hold the button “Store” while power on until
the display shows the version number. If something went
wrong, just repeat the whole procedure.
