Kawai MP11, Руководство пользователя

Страница: 99 / 136

SY
ST
EM
M
en
u
1
Utility
1. System Tuning
This parameter sets the global master tuning of the MP11 in
0.5Hz increments.
* The default setting is A = 440.0 Hz
2. Eff. SW Mode
This function determines whether the ON/OFF state of the EFX,
REVERB, and AMP buttons is recalled when selecting sounds.
Mode Description
Preset ON/OFF state is recalled when selecting sounds.
Temp. ON/OFF state is not recalled when selecting sounds.
* The default setting is Preset.
3. Knob Action
This parameter determines the adjustment behaviour of the
four control knobs (A, B, C, D).
Mode Description
Normal Value changes immediately when control knob is turned.
Catch
Value does not change until control knob ‘catches’ the
previously stored value, thus preventing unexpected
jumps in parameter values.
* The default setting is Normal.
4. Volume Fader Action
This parameter determines the adjustment behaviour of the
section volume faders.
Mode Description
Normal Volume changes immediately when fader is moved.
Catch
Volume does not change until fader ‘catches’ the
previously stored volume value, thus preventing
unexpected volume jumps.
* The default setting is Normal.
5. LCD Contrast
This parameter adjusts the contrast of the LCD display.
The contrast becomes sharper as the value increases.
* The default setting is 5.
6. LCD Reverse
This parameter inverts the black and white pixels of the LCD
display, which may improve visibility in certain situations.
* The default setting is OFF.
7. Input Level
This parameter adjusts the gain of the MP11’s LINE IN jacks.
If the output level of the external device is too high, reduce the value
of this parameter. Alternatively, if the output is too low, increase
the value of this parameter.
* The default setting is 0 dB.
8. Audio Out Mode
This parameter allows the MP11’s LINE OUT signal to be
changed from stereo to dual-mono.
This may be useful in certain situations, allowing one output to be
used for a monitor speaker and the other to be plugged into the
mixing console.
Mode Description
Stereo The Line-out signal is normal stereo.
2xMono The Line-out signal is mono on both jacks.
* The default setting is Stereo.
* Stereo EFX such as AutoPan will be turned OFF when 2xMono is selected.
10. Auto Power Off
This parameter determines the period of inactivity that should
pass before the MP11 automatically turns OFF.
Value Description
Off The Auto Power Off function is disabled.
30 mins. The MP11 will turn off after 30 minutes of inactivity.
60 mins.
The MP11 will turn off after 60 minutes of inactivity.
120 mins.
The MP11 will turn off after 120 minutes of inactivity.
* The default setting for this parameter depends on the market region.
value
: 1 ~ 10
SYSTEM Menu parameters & functions
value
: 427.0 ~ 453.0 Hz
preset
,
temp
.
normal
,
catcH normal
,
catcH
o
n
, o
ff
value
: –18 dB ~ +18 dB s
tereo
, 2
x
m
ono
9. Lock SW Mode
This function determines which controls will be locked when
the LOCK ( ) button is pressed.
Mode Description
Panel The main control panel will be locked.
Bend The pitch bend wheel will be locked.
Mod.
The modulation wheel will be locked.
Center
The centre pedal will be locked.
Left
The left pedal will be locked.
EXP
The expression pedal (EXP) will be locked.
* The default setting is Panel Lock .
o
ff
, 30
mins
., 60
mins
., 120
mins
.
6
types