Kawai MP11 Скачать руководство пользователя

Страница: 77 / 136

Audio Record/Playback

(USB Memory)

Playing an audio file

The MP11 is also capable of playing MP and WAV audio files stored on a USB memory device. This function allows
performing musicians to play along with professional backing tracks, or conveniently learn the chords or melody
for a new piece.



Audio Player supported format specifications

Audio Format

Specifications

Bitrate

MP3

32 kHz/44.1 kHz/48 kHz, Mono/Stereo

8-320 kbit/s (fixed & variable)

WAV

32 kHz/44.1 kHz/48 kHz, Mono/Stereo, 8 bit/16 bit

* MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.



Preparing the USB memory device

Prepare a selection of MP3 or WAV audio files, copying the data
to a USB memory device.

* USB devices should be formatted to use the ‘FAT’ or ‘FAT32’ filesystems.

1. Connecting a USB memory device

Connect the USB memory device to the USB to Device port.

The USB device will be scanned.

2. Turning the Recorder mode ON

Press the RECORDER section’s ON/OFF button to turn Recorder
mode ON.

The LED indicator for the RECORDER section’s ON/OFF button
will turn ON, and the Audio recorder screen will be shown in
the LCD display.

Audio

recorder

selected

3. Selecting the Load Audio function

Press the F3 function button (LOAD).

A listing of the MP3 files stored in the root folder of the USB
device will be shown in the LCD display.

LED indicator ON:

Recorder mode is turned ON

* If the MIDI recorder screen is shown, press the F1 function button (AUDIO)

to select the Audio recorder.

Содержание MP11








































































































































Результаты поиска

Содержание MP11

Отзывы:

Похожие инструкции для MP11

Бренды по названию

Популярные бренды

Kawai MP11, Руководство пользователя

Результаты поиска

Содержание MP11

Отзывы:

Похожие инструкции для MP11

Бренды по названию

Популярные бренды