Kawai MP11 Скачать руководство пользователя страница 104

Страница: 104 / 136

Creating a User Touch Curve

1. Starting the User Touch Curve analysis

After selecting the User Touch Curve memory to be edited:

Press the F4 function button (NEXT) to start the User Touch
Curve analysis.

2. Capturing the dynamic range

Play the piano dynamically from very soft to very loud, allowing
the instrument to analyse the personal playing technique.

3. Completing the User Touch Curve analysis

Press the F4 function button (EXEC) to complete the User Touch
Curve analysis.

A confirmation screen will be shown in the LCD display.

Play the piano to check the newly created touch curve, then
press the F4 function button (SAVE) to store it to user memory.

4. Storing the User Touch Curve

Press the F2 button (YES) to confirm the store operation, or the
F3 button (NO) to return to the previous screen.

* The +/YES and –/NO buttons can also be used to confirm or cancel the

store operation.

The new User Touch Curve will be used for the selected sound
section automatically.

SYSTEM Menu parameters & functions

F3 button:

NO: Cancel

F2 button:

YES: Confirm

* More than one attempt may be required in order to create an accurate

User Touch Curve.

* Reducing the master volume fader to the lowest position before creating

the User Touch Curve may help to reduce user distractions, thus improving
accuracy.

Содержание MP11








































































































































Результаты поиска

Содержание MP11

Отзывы:

Kawai MP11, Руководство пользователя, Страница: 104 / 136

Результаты поиска

Содержание MP11

Отзывы: