Page
32
5
Lesson Function
Step 3
Use the VALUE buttons to select a song number.
You may change songs while a song is being played. Note, however, you cannot change the songs while you are
recording your performance.
Listening to a song
Step 1
Press the PLAY / STOP button of the RECORDER.
There will be a one bar count-in before the song begins playing.
The bar and beat number is displayed during the count-in before
the fi rst bar of the song.
The fi rst bar number of the song is zero if there are pick up notes
before the fi rst bar.
The metronome will not continue after the count-in bar, but you may turn
it on by pressing the TEMPO or BEAT button of the metronome.
To change the tempo, use the VALUE buttons while holding down the
TEMPO button.
Press the
T
button to decrease the tempo, and press the
S
button to
increase the tempo.
To reset the tempo, press the VALUE
S
and
T
buttons at the same
time.
Step 2
Press the PLAY / STOP button of the RECORDER once again.
The song play back stops.
If the PLAY / STOP button is pressed again, there will be a one bar count-in, and the song play back resumes.
If you wish to listen to the song from the beginning, fi rst stop the song by pressing the PLAY / STOP button, and
then press the and buttons at the same time.
Press this button fi rst.
Book
Name
-01
Bar=
1-
1
Œ=092
Song number
Tempo
Bar and beat number
Book
Name
-01
Bar=
0-
1
Œ=092
Book
Name
-01
Bar=
5-
3
Œ=092
CA61̲EN.indd 32
2008/10/17 12:11:41