Page
19
3
Pla
ying the Piano
5) Reverb / Effects
You might have noticed that when you select some of the preset sounds, the LED indicator for the EFFECTS or
the REVERB button is turned on. The reason for this is some of the sounds are set up with reverb or an effect on
as their initial setting. Adding an effect to the sound enhances tonal quality and improves acoustical realism. The
CA61 piano is equipped with fi ve types of reverb and seven different effects.
Using REVERB
Reverb adds reverberation to the sound, simulating the acoustic environment of a recital room, stage, or concert
hall.
Five types of reverb are available as follows:
ROOM1, ROOM2
: Simulates the ambiance of a living room or small rehearsal room.
Room2 simulates a larger room than Room1.
STAGE
: Simulates the ambiance of a small hall or live stage.
HALL1, HALL2
: Simulates the ambiance of a concert hall or theater.
Hall2 simulates a larger hall or theater than Hall1.
Step 1
Press the REVERB button to turn the reverb on / off. The LED indicator will be turned on to indicate that reverb is in use.
Press and hold the REVERB button and the currently selected reverb type will be shown in the LCD display.
To change the reverb type, while holding the REVERB button use the VALUE buttons to change the reverb type.
Release the REVERB button once the desired reverb type is displayed.
The currently selected reverb type is displayed while the REVERB
button is held down.
Reverb will be turned off when the REVERB button is pressed and its
LED indicator turns off.
To turn the selected reverb on, press the REVERB button once again
to turn its LED indicator on.
Hold down the button.
ÇÈ
ÇÈ
ÇÈ
ÇÈ
Reverb
=
Room
1
Reverb
=
Room
2
Reverb
=
Stage
Reverb
=
Hall
1
Reverb
=
Hall
2
CA61̲EN.indd 19
2008/10/17 12:11:38
