Page
75
9
Men
u Functions
11) Transmit Program Change (Sound Type) Numbers On / Off
Transmitting a program change number using the SOUND SELECT buttons
This determines whether or not the CA61 piano will transmit program change information via MIDI when pressing
the SOUND SELECT buttons. When set to on and with Multi-Timbral Mode set to off or on 1, pressing the SOUND
SELECT buttons will send the program change numbers listed in the left half of the chart on the next page.
When multi-timbral mode is set to on 2, program numbers listed in the right half of the chart on the next page will
be transmitted via MIDI.
In addition to SOUND SELECT buttons, other button operations such as touch curve, dual, digital effect, and reverb
settings can be transmitted as MIDI exclusive data when the corresponding buttons are pushed.
When set to off no program change or other panel information will be transmitted via MIDI.
Refer to page
77
for multi-timbral mode.
Step 1
Use the MENU buttons to select the sending program change on/off function.
The second line on the display shows On or Off.
Step 2
Use the VALUE buttons to select On or Off.
Step 3
When you are fi nished, press any one of the SOUND SELECT buttons to exit the menu.
The sending program change on/off setting defaults to “On” each time the power is turned off. You can use the user
memory function (page
78
), to save your desired sending program change on/off setting. This way your current sending
program change on/off setting will remain even after the power is turned off.
When using dual / split mode, on / off information and sound type settings for each mode are transmitted as exclusive
data, but program numbers will not be transmitted.
Program numbers will also be transmitted when multi-timbral mode is on.
11
Transmit
PGM
=
On
CA61̲EN.indd 75
2008/10/17 12:11:47