Kawai CA401, Руководство пользователя

Страница: 42 / 48

Appendix
A
ss
em
bly
In
st
ru
ct
ions
① Lift the main body (A) and carefully place it onto
the stand.
Position the main body (A) towards the front of the
stand, so that the metal tting holes are visible
when viewed from above.
② Secure the side panels (C) in place. While
supporting the main body (A) with one hand so that
it does not tip and fall, gently slide the main body
(A) backwards until the hooks on the main body (A)
engage with the metal ttings on the side panels (B
and C) and lock into place.
. Mounting the main body (A) onto the
stand
When lifting the main body (A) onto the
stand, be careful not to catch/trap hands
and ngers.
CAUTION
① Loosely fasten the main body (A) to the stand
using four screws (with washer)
.
② Loosely tighten the screws , and move the
main body (A) into position so that the four screws
can be inserted straight. Then, adjust the main
body (A) so that the overhang of the main body (A)
is even on the left and right when viewed from the
front.
③ Tighten the loosely fastened screws until the
spring washer is compressed.
. Fastening the main body (A) to the
stand
Tighten all screws securely to ensure that
the main body (A) is rmly attached to the
stand. It is extremely dangerous if the main
body (A) falls from the stand.
CAUTION