20
SMARTair. SMARTair mobile.
A 8.4 Suction levels
The suction levels (1 - 4)
3
-
6
can be
selected by pressing the keys (+)
7
and (-)
8
(green LED’s illuminate).
From Software version 2.0, the set
level can be saved and stored in
memory after SMARTair is switched off.
Identifying the software version
9
Switch On
after 2 seconds
3
display of version
(version 2 = flashes twice)
4
connected to 50 Hz
5
with continuity sensor
(model SMARTair plus)
Display status via LED
2
A 8.4.1 Storage of the suction levels
- from Software Version 2.0
Storage:
Hold key “Plus“
7
pressed, then press
mains switch
9
to “ON“.
Wait until the 4 Level-LED‘s
3
-
6
flash, then release key “Plus“
7
.
Storage of the suction levels has now been
activated.
Switch mains switch
9
off, wait 2 seconds
and switch on again.
The selected storage levels are now stored
for future use.
Deletion:
Hold key “minus“
8
pressed, then press
mains switch to “ON“.
Wait until the 4 Level-LED’s
3
-
6
flash, then release key “minus“
8
.
Storage of the suction levels has now been
de-activated.
Switch mains switch
9
off, wait 2 seconds
and switch on again.
The selected storage levels are no longer
stored for future use.
SMAR
Tair
SMA
RTa
ir
m
obile
9
9
4
3
5
2
8 7
6
