10
SMARTair. SMARTair mobile.
A 5 Installation and connection
A 5.1 SMARTair
Apart from those procedures
described in these operating
instructions, repairs and maintenance must
be carried out only by technically-qualified
personnel.
Preparing SMARTair for operation.
Screw the motor-housing
3
to the flange
1
with four screws
2
. Insert Sub-D plug
4
in the provided receptacle on the casing
and fix with the two screws
5
.
Remove lid
7
from SMARTair .
Locate SMARTair in EWL support frame
6
.
Press mains switch
0
in position ,,0“.
Insert supplied mains cable
9
into
the provided connection
8
at
SMARTair, and insert mains plug into a
grounded mains socket which is easy to
reach. (Similarly if using an extension line).
Arrange the mains cable
9
so that
SMARTair can be withdrawn to the
stop without pulling out the plug.
Only equipment with max. 500 watt
consumption can be connected.
Replace lid
7
on SMARTair and push the
unit in the support frame
6
as far as the
stop.
SMAR
Tair
SMAR
Tair
SMAR
Tair
7
5
3
9
6
8
4
1
2
0
7
