manualshive.com logo in svg

KaVo SMARTair plus, Инструкция по эксплуатации

Поделиться
Скачать
KaVo SMARTair plus Скачать руководство пользователя страница 33

6

   

Operation

Note
The distance between the item generating the dust (such as a cutter) and the intake

opening may not exceed 50 mm.

6.1

   

Automatically operate the SMARTair plus / SMARTair plus mobile

Note
Automatic mode is recommended for units that have an electrical connection.

Set the SMARTair plus / SMARTair plus mobile to automatic

▶ Switch the power switch 2 or 3 to "On".

▶ Press the "Automatic“ ④ key until the "Automatic" LED ②shines.

In the "Automatic" position, the SMARTair plus/SMARTair plus mobile is auto‐

matically turned on and off together with the connected unit.

Turn the SMARTair plus / SMARTair plus mobile on and off

▶ Turn the unit on.

The SMARTair plus/SMARTair plus mobile also automatically runs.

▶ Turn off the unit.

The SMARTair plus/SMARTair plus mobile runs for a few seconds, and then

independently shuts off.

See also: 6.5 Setting the response sensitivity, Page 35

 

 

 

 

 

 

 

 

 

 

 

 

 

Instructions for use SMARTair plus, SMARTair plus mobile
6 Operation | 6.1 Automatically operate the SMARTair plus / SMARTair plus mobile

31/57

Содержание SMARTair plus





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды