KaVo KaVo Primus 1058 Life TM, Краткая инструкция по использованию

Страница: 22 / 38

Short instructions for use 8 Operation of the operating light KaVoLUX 540 LED (op‐
tional) 22
Switch on COMPOsave mode
▶ Press the "Dim treatment light" key.
or
▶ Hold your hand in front of the sensor for 2 sec.
ð
The COMPOsave mode switches on.
ð
The COMPOsave mode can be recognised by the yellow light.
▶ Press the "Dim treatment light" key.
or
▶ Hold your hand in front of the sensor for 2 sec.
ð
The treatment light switches back to normal light mode.
Setting the brightness of the dimmer (COMPOsave mode or normal light)
▶ Press and hold down the "operating light dimming" button.
ð
Signal buzzes, brightness changes from dark to bright in stages.
▶ Once the desired brightness is reached, release the "operating light dimming" button.
Switching between COMPOsave mode and dimmed light and normal light
▶ Press the "Mode/colour temperature" button
ð
The treatment light switches from COMPOsave mode to dimmed normal light.
▶ Press the "Mode/colour temperature" button once again.
ð
The treatment light switches back to COMPOsave mode.
ð
The COMPOsave mode can be recognised by the yellow light.
Setting the colour temperature
▶ Press and hold down the "Mode/colour temperature" button
ð
Colour temperature changes in five steps.
▶ Release the button when the desired colour temperature is achieved.
Turning the laser mode On and Off
▶ Press the „operating light“ button and the "operating light dimming" button on the
operating light simultaneously.
ð
The laser mode switches on.
ð
Laser mode is activated: the operating light shines for 1 second in green and then
changes to a white light.
or
▶ Hold your hand in front of the sensor for 3 sec.
ð
The laser mode switches on.
ð
Laser mode is activated: the operating light switches initially in COMPOsave mode and then
shines for 1 second in green and then changes to a white light.