manualshive.com logo in svg

KaVo EXTRAmatic 9040, Инструкция по эксплуатации

Поделиться
Скачать
KaVo EXTRAmatic 9040 Скачать руководство пользователя страница 35

Instructions for use EXTRAmatic 9040

5 Operation | 5.3 Utility programs

Current identification
If the shape grinder (AP 1) is in operation, the sandblaster (AP 2) and technical work‐
station (AP 3) are locked.
Example 3:
Extraction channel 1: Shape grinder
Extraction channel 2: Sandblaster
Extraction channel 3: Technical workstation

Settings for AP 1
Extraction level: 72 U
Optimum: No
Current identification
Settings for AP 2
Extraction level: 36 U
Optimum: No
Current identification
Settings for AP 3
Extraction level: 24 U
Optimum: No
Current identification
The shape grinder (AP 1), sandblaster (AP2) and technical workstation (AP3) can be
operated at the same time.

5.3.3 "User survey" utility program (2100)

▶ Using the the up or down button, select the "User survey" utility program and

choose ENTER.

▶ Using the up or down button, select the required workstation (AP1, AP2 or AP3)

and choose ENTER.

ð

The stored "User system" settings will be displayed.

▶ Press the back button

ð

This takes you out of the utility program.

35 / 56

Содержание EXTRAmatic 9040

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды