KaVo EXPERTmatic LUX contra-angle E25 L, Инструкция по эксплуатации

Страница: 13 / 26

Instructions for use EXPERTmatic LUX contra-angle E25 L - 1.007.5550 EXPERTmatic contra-angle E25 C - 1.007.5551
5 Operation | 5.4 Removing the milling tool or diamond grinder
CAUTION
Danger of injury from cutters or grinders.
Infections or cuts.
▶ Wear gloves or fingerstalls.
CAUTION
Hazard from defective chucking system.
The cutter or grinder could fall out and cause injury.
▶ Pull on the cutter or grinder to check that the chucking system is okay and the
cutter or grinder is securely held. When checking, inserting and removing, use
gloves or a fingerstall to prevent an injury or infection.
▶ Press the push button firmly with your thumb and simultaneously insert the milling
or grinding tool until it contacts the stop.
▶ Check that the cutter or grinder is securely attached by pulling on it.
5.4 Removing the milling tool or diamond grinder
WARNING
Hazard from rotating cutter or grinder.
Lacerations and damage to the chucking system.
▶ Do not touch rotating cutter or grinder.!
▶ Never press the press-button while the cutter or grinder is rotating!
▶ Remove the cutter or grinder from the contra-angle handpiece after treatment to
avoid injury or infection while storing it.
▶ After the cutter or grinder has stopped rotating, press the press-button with your
thumb and simultaneously pull out the drill bit or bur.
13 / 26