KaVo 1.000.4672, Инструкция по эксплуатации

Страница: 12 / 26

Instructions for use PROPHYflex 3 - 2018 - 1.000.4672, - 1.006.9926, - 1.006.9928
5 Operation | 5.1 Attaching the medical device
12 / 26
5 Operation
Note
At the beginning of each workday, the water-conducting systems should be rinsed
for at least 2 min. without the medical device being attached.
5.1 Attaching the medical device
▶ Mount the medical device accurately on the MULTIflex (LUX) / MULTIflex LED
coupling and push it backward until the coupling audibly locks in the medical de‐
vice.
▶ Check if the seat of the medical device on the coupling is secure by pulling on it.
5.2 Remove the medical device
▶ Hold the coupling tight, and pull the medical device off while twisting slightly.
5.3 Filling the powder container
▶ Unscrew the powder container to the left against the direction of the arrow.
▶ Before filling the powder container, shake the powder in the refilling bag well.
▶ Screw on the powder container straight on to the right in the direction of the ar‐
row.
CAUTION
Close the powder container if it is not needed.
If you do not need the powder container, close it with the rubber cover.
▶ Only use original KaVo powder.
Note
Observe the safety data sheets concerning the KaVo powders! These are available
for inspection at www.kavo.com, "Safety data sheets".
Adjusting the powder volume