Operating Manual
8
Original Operating Manual
3.2
Appliance clamp arms
The right and left arms of the 1-1,5T413GT model consist of guide profiles (1) and fixed, welded
arms (3).
The right and left arms of the 2-3T413GT model consist of guide profiles (1) and arms (4) in a box
design with adjustable pre-load.
The left arm of the 2-3T413GT-1L model consists of guide profiles (1), arm brackets (2) and a
pressure plate (5), which has a floating mounting. The right arm of the 2-3T413GT-1L model consists
of guide profiles (1) and an arm (4) in a box design. Both arms are equipped with adjustable pre-
load.
Both arms of the 2-3T414GT-1L model consist of guide profiles (1), arm brackets (2) and pressure
plates (5), which have floating mountings. Both arms are equipped with adjustable pre-load. The arm
pressure plates are glued or bolted to the rubber layer, adapted to the load requirements.
Both arms of the model 2T414GT-2L consist of conduits (1) onto which an arm carrier (2) is welded.
Two pressure plates (5) per arm are mounted so that they swing in the arm carrier (2).
