-4-
3.
If the frame profiles form a uniform plane, use the “A” bolts to calibrate the profile by tightening the bolts
to obtain a maximum even plane (Fig. 5), leaving room for the bolts (Fig. 6), which will be used to fix the
black frame profiles in the next step.
4.
Unwind the surface gently with the black side up on the included sponge, as in Fig. 7. Remember that the
surface is intended for directional projection. Pay attention to the correct direction when connecting to the
frame, so that the top of the surface corresponds to the top of the frame.
5.
Gently place the folded frame on the projection surface, so that the corners of the frame and the surface
look the same on each of the corners (Fig. 8).
www.kauber.eu
Fig. 7
Fig.5
Fig.6
Fig.8