-3-
SCREEN MOUNTING
1.
Place all frame parts on a clean and level surface. Insert the steel angles into the profile of the screen frame,
as shown in Fig. 1, previously placing square washers in each profile as in Fig. 2. NOTE! Insert 4 additional
washers into the upper profile of the frame, which will be used to install wall brackets Fig. 2.
2.
Slide the second frame to make a right angle, then use the included “B” bolts to attach the angle to the
screen frame (Fig. 3). Adjust the screen profiles to obtain a right angle and tighten the “B” bolts (Fig. 4).
www.kauber.eu
Fig.1
Fig.2
Fig.3
Fig. 4
