-7-
10.
Invert the screen slightly and check whether the surface is stretched evenly and there is no deformation.
If there is such an occurrence, gently move the surface with your hand from the centre towards the corner.
Fig. 14.
IMPORTANT:
the area where you can touch the surface is 10 mm from the edge of the screen (Fig. 14).
11.
Place the black profile on the outer part of the frame by unscrewing the centre fixing of the surface made
in step 9., proceeding as shown in Fig. 15 to Fig. 18.
NOTE!
After placing the profiles Fig. 17, slightly lift the screen, so as to reduce the distance between the bolt
and the screen profile.
www.kauber.eu
Fig.14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
