-2-
The FRAME CLR series are projection screens with a perfectly stretched projection surface, stretched
on a stylish aluminium structure. This series is dedicated to UST projectors.
IMPORTANT!!! INSTALLATION AND OPERATION NOTES
1.The screen should be installed in a place away from moisture and strong sunlight.
2. Use the gloves provided in the kit to mount the surface and install the screen.
3. Clean with a soft microfiber cloth, lightly moistened with soap dissolved in water. Due to the structure of the
surface, wipe only with horizontal movements, do not make up and down movements. Do not use active
cleaning agents. After cleaning, the screen should be carefully wiped dry to remove any residual moisture.
4. Correctly mounted screen must be absolutely level in every plane.
5. DIMENSIONAL TOLERANCE: Projection surface: ± 0.5% of the nominal size; components ± 5 mm.
IMPORTANT:
Any mechanical damage to the surface voids the warranty.
Kit Contents:
Quantity
Frame screen – frame elements
4 pcs.
Mounting angle
8 pcs.
M6x8 Screw (“A” bolt)
24 pcs.
6.6 Washer
24 pcs.
M6x12 Grub Screw (“B” bolt)
32 pcs.
Magnet complete with a screw
2 pcs.
Springs for securing surfaces
*
Wall mounting bracket
2 pcs.
Mounting pins for handles (dowel + screw)
4 pcs
Plate for magnets
2 pcs.
Plate mounting pins (dowel + screw)
4 pcs
Projection surface
1 piece.
Frame profiles with the width of 2.5/1 cm
4 pcs
*-depending on the screen size
www.kauber.eu
