10
4.
Remove the wheel from the Balancer and
use a tire changer (sold separately) to remove
the tire from the rim, rotate it 180°, and remount it
on the rim. Fully inflate the tire and mount the
Wheel
5.
on the Balancer in the same location as the
previous cycle. Press [START] to activate a spin
cycle.
6.
When finished the display will read:
The left reading shows the amount of weight
originally needed to balance the wheel: 45
grams. The right reading shows the amount to
reduce the weight after rotating and remounting
the wheel:
This means that only 9 grams of weight are
needed to balance the wheel.
Optimize Balancing Function (OPT)
This function is recommended only when the
weight displayed to balance the wheel is over 30
grams (1. 06 oz). Use the following procedure to
adjust the tire and wheel so that less weight is
needed to complete the process.
To begin, the tire should be mounted with the
Hood down after completing a cycle.
1.
Press the
[OPT]
key.
[OPT][
]
will be displayed.
2.
Press
[START]
to activate a spin cycle.
When finished the display will read:
[ I ] [180]
180 displayed means the tire and the rim need to
be rotated by 180 degrees away from each other
and remounted.
3. Before unmounting the wheel from the
balancer, mark the rim and the cone with
chalk (sold separately) so that the same
mounting position can be re-mounted for
the next operation.
