Kato Imer CARRY 110, Руководство по эксплуатации

Страница: 35 / 51

3 MAINTENANCE
MINIDUMPER
CARRY 110
27
Note: Clean the element’s mount. Any dust left in the element mount can
end up in the engine.
5. Clean the main filter element with compressed air (max pressure
200 kPa - 2 kgf/cm²). Direct the jet of air along the fins of the element.
6. Inspect the filter element after cleaning. Do not use a filter element
which is bent or has damaged gaskets.
Note: Used elements may have foreign bodies in the mounting surfaces
which cause leaks; if you see streaks of dirt on the surface of the gaskets
this means that the element is leaky.
If you see such dirt, look for foreign bodies inside and outside the gasket
casing.
7. Fit the clean main element (2) and fit and secure the service cover (1)
with the valve (2) pointing downwards.
Note: Insert a new element. When the gasket is correctly seated in the
tube, it forms a snug fit with the inlet.
For a better seal, press the end of the filter element against the external
ring.
8. Reset the dust indicator with the reset button.
9. If the dust indicator refuses to reset, replace the element.
REPLACING THE AIR FILTER ELEMENT.
1.
Remove the service cover (1) from the filter housing (3).
2.
Remove the element (2) from the filter housing (3). Cover the open
engine air intake.
3.
Clean the inside of the cleaner housing (3) and cover (1). Remove
the open air intake cover.
Note: Clean the element’s mount. Any dust left in the element mount can
end up in the engine.
4.
Fit the new element (3).
5.
Refit the service cover (1) with the valve pointing downwards.
6.
Reset the dust indicator with the reset button.