8
Remote Control Command Sets
The RC 660 remote control supports up to four devices as well as the
receivers of the UFD 5xx (not UFD 554, 558) and UFD 4xx families.
This allows you to operate two receivers independently of one another
in the same room.
How to assign the receivers an infrared code:
Switch on the receiver (Stand-by) and leave the other receiver(s) off
(power switch off).
On the remote control simultaneously press
Address 1 =
+
+
(for the fi rst receiver)
to
Address 4 =
+
+
(for the fourth receiver)
Switching remote control infrared code to operate different receivers:
Switch to
Address 1 =
+
(for the fi rst receiver)
to
Address 4 =
+
(for the fourth receiver)
+
(red) = Kathrein UFD 5XX code for remote control RC 400
Note:
The RC 600 and RC 650 remote controls cannot be replaced!
Controls, Displays and Connections