11
Using the Front Panel/Display
The unit has four operating buttons on its front panel (Channel ▲
and ▼ and /-) to change channels or alter the volume. By
simultaneously pressing the “Channel ▲” and “Volume -” buttons the
on-unit control can be temporarily switched to Radio/TV toggle mode.
Pres the “Channel ▼” button to switch to radio mode, or the “”
button to switch to the TV.
If you cannot fi nd your remote control and your unit is in Stand-by mode,
fl ick the power switch off briefl y and back on again and then press the
“Channel ▲” or “Channel ▼” button to turn the unit on.
Using the Front Panel
Display
The channel number is shown on a green 4-digit 7-segment display.
Displays readouts and their meanings:
P 25
-
TV channel 25 selected
R 14
-
Radio channel 14 selected
P .2.3.
-
Dots between the channel number digits signify that
the mute is active
-
-
Unit is in Stand-by mode and can be switched on
by pressing any number button or the “Channel ▲▼”
buttons
20.15
-
Time indicator in Stand-by mode, can be activated and
deactivated from the “Various” menu
Vcr
-
In playback mode the video/audio signal is automatically
switched from the video recorder to the TV set
– including in Stand-by
Vcr-
-
On automatic forwarding of video/audio data in
Stand-by
mode
L 13
-
Volume indicator
[ r t ]
-
Shown when Radio/TV toggle mode active