Kathrein UFS 931sw/HD+, Руководство по эксплуатации

Страница: 67 / 96

67
- Mono (from the right channel) or
- Mono (total)
Multichannel-Audio Automatic
Select here, if multichannel audio is available (e. g. Dolby Digital), whether this multichannel audio is to
be output automatically (setting “On”). The receiver may need to be connected to a Dolby Digital system
or an AV ampli
fi er for this purpose.
HDMI Audio
Select here whether the digital audio is to be transmitted via the HDMI interface.
Audio Delay
Here you can set an audio delay if the video and audio transmission are not synchronised. You can
choose between the settings “None” and from 10ms in steps of 10 up to 300ms.
After calling up the menu you will see the
following on-screen display:
The individual items are selected using
the

buttons. The changes to
the current settings can be made using
the

buttons.
Info Banner Duration
Select here whether the info banner is to be displayed on a channel change and if so, for how long.
Possible settings:
- None
- 1, 2, 3, 4, 5 .....15 seconds or
- Permanent
Info Banner Automatic
Select here whether the info banner is to be displayed not only on a channel change, but also on a
programme change on a channel. You can only make this setting if the setting “Info Banner Duration”
is set to four seconds or longer, or “Permanent”.
Main Menu - Settings