58
After calling up the menu you will see
the following on-screen display:
The
buttons allow you to select
different sets of parameters for the
search.
Satellite
Select the satellites to be searched using the
buttons or select the setting “All”. If “All” is
selected, all the satellites you have selected in “LNB Settings” will be searched. Make sure your reception
system is aligned to the selected satellite(s).
Channels to search for
Use the
buttons to select the type of channels that are to be searched for. You have three options:
- “All”
All channels are searched for
- “Only free-to-air channels”
Only free-to-air channels are searched for
- “Only encrypted channels”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CA (Conditional Access) module and a
valid smart card together with a valid subscription to the relevant Pay TV provider.
Then use the
buttons to switch to the
fi
eld “Press <OK> to start scanning for all channels”.
Pressing the
button starts the search.
The list you selected previously is
updated by the receiver. After the update
con
fi
rm the receiver message displayed
using the
button. The receiver
jumps back to the Search for Channels
menu. Press the
button to exit the
menu again.
Содержание UFS 931sw/HD+
