manualshive.com logo in svg

Kathrein UFS 931sw/HD+, Руководство по эксплуатации

Поделиться
Скачать
Kathrein UFS 931sw/HD+ Скачать руководство пользователя страница 27

27

Always follow the operating instructions from your Pay-TV provider and the 
instructions supplied with the smart card and the CA module!

The cards and modules are issued by the respective Pay TV providers, and contain 
the subscriber data and details of the channels for which the subscriber has paid. 
These channels are always scrambled.
Contact the Pay TV provider if you are interested in subscribing to a particular 
Pay TV channel.

You are responsible for the use of the smart card in the CA!

The smart card sold by the Pay TV provider, specifi c to a particular encryption 
technology, is inserted into the CA module.

Store your card and PIN code securely when not in use!

Connection and Set-Up

The smart card reader (small slot) 

 on the UFS 931 (Nagravision embedded) is intended to be 

used for the HD+ Card. The smart card reader is behind the 

fl

 ap on right on the front underneath the 

Common Interface (large slot). It must be possible to insert the smart card (chip contacts pointing down) 
in the smart card reader without the need for a large amount of force. Do not use excessive force and 
pay attention to the manual supplied with the smart card.

Содержание UFS 931sw/HD+

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды