Kathrein UFS 931sw/HD+, Руководство по эксплуатации

Страница: 19 / 96

19
If you use a UAS 481 (single cable LNB) in your reception system, you are only
allowed to select a satellite in position “A”. The remaining positions remain empty
and must be set to “Not used”. In addition, for position “A” after pressing the

button both frequencies (LOF) must be set to “10200”. The settings can be made
using the number pad or the

keys. Then press the

(green) button and on
“Save LNB settings” select “Yes”. Confi rm the selection with the

button.
Connection and Set-Up
Use the

buttons to switch to the “New SCD Registration” line. Using the

buttons select
the “Manual” setting, and press the

button. The following on-screen display appears:
Connected equipment
Use the

buttons to select the type of single cable system used in your reception system:
If your system or your single cable component is not listed, select the setting “Userde fi ned”.
Your available options are:
- KATHREIN UAS 481 (single-cable LNB),
- KATHREIN EXR 551,
- KATHREIN EXR 552,
- KATHREIN EXU 908 or
- Userde fi ned (for all single-cable systems not covered by any of the above speci fi cations)
You can only use the “Secure
Channel with PIN” function if
this function is supported by
the single-cable components
used. In the case of Kathrein
single-cable components, this
is currently only the case for
the EXU 908.