Kathrein UFO 372/TP, Инструкция по эксплуатации

Страница: 22 / 68

Sample text
1.14 Transport stream processor: Operator ID
I 1236 MHz TP
27,500 MS/s 3/4 QPSK
Outp. S21 306.00 MHz
6,900 MS/s 64 QAM
Main menu
** UFO 372TP-I **
Filter off
OID off 00h
“Transport stream processor” sub-menu
The setting of the Operator ID “OID” is performed in the TP (Transport stream processor) sub-menu.
The “ TP ” transport stream processor is selected with the “ < ” or “ > ” buttons and the sub-menu is called up with the “Sub-menu”
button.
The Operator ID function is selected with the “ < ” or “ > ” buttons and is activated/deactivated with the “ + ” and “ - ” buttons.
The settings available are OID “
on ” / “ off ”.
The Operator ID can be entered; to do this use the “ < ” and “ > ” buttons to select the numeric value and the “ + ” and “ - ” to
change it correspondingly. The values available are “00h” to “FFh”.
This sub-menu can be exited only when the cursor is on the “OID” parameter.
To do this, use the “ < ” and “ > ” buttons to select “OID” and press the “Sub-menu” button to return to the main menu.
The fi rst line shows the type of the programme that was selected, together with the number of the programme and the number
of programmes on the transponder.
T=TV programme R=Radio programme D=Data service
The second line shows the programme name, together with its fi lter status ( + or - ).
The default setting for the status of the programmes that are displayed is “ - ”, i.e. no programmes are transmitted when the
programme fi lter is switched on, but the programming list is not being processed .
The “Generate” button in the third line starts the compilation of the programme list, that then is effective.
The selection of the programmes carried over is performed using the “ + ” and “ – ” buttons, where the status “ + ” means the
programme will be carried over and the status “ – ” means it will be removed.
The “Status” parameter is selected using the “ < ” and “ > ” buttons.
The settings become effective when the fi lter table has been compiled. This is done using the “ < ” and “ > ” buttons; select the
“ Generate ” parameter and use the “ + ” or “ – ” buttons to initiate the compilation of the programme table.
Programme no. (e.g. 001) Quantity (e.g. B. 009)
of the selected programme of the programmes in the transponder
Note: The programme fi lter can be processed even if it is not activated (“off”). This means that the operation can be
checked or temporarily deactivated without waiting times or reprogramming.
If the programming list was not processed but the programme fi lter was switched on, the previously saved list
will be active, or in the absence of any list no programmes will be transmitted.
Programme fi lter
being generated
□ □ □ □
...
“Filter” sub-menu On generating the programme fi lter
The “Programme fi lter” sub-menu is exited using the “Sub-menu” button.
** UFO 372TP-I **
T / 001 / 009
Das Erste / -
Generate
Note: If the maximum possible number of programmes carried over is exceeded, an error message appears.
936.3224/A/1207/22.68e