Kathrein MobiSet 4 CAP 920, Оригинальное руководство по эксплуатации

Страница: 22 / 56

22 from 56
Installation and connection
5
3

↓
↓
↓
↓
↓
↓
↓
↓
↓
4 Screw attachment
Left Right
Remove the wood screws supplied from their transport attachment on the top of the respective mounting
piece (2 pieces).
Place the two mounting pieces on your
receiver as shown in Figures 1–3. During
the process the following should be taken
into account:
1. Left (L) and Right (R) markings (see
arrows Figure 2)
2. The teeth on the underside of the
mounting pieces must be inserted in
the first and last row of the ventilation
slots on the top of the receiver (see the
arrows Fig. 1)
Now hold the receiver, with the installation kit attached, at the
installation location. Screw in the wood screws supplied through
the smaller holes in the screw attachment area (4 x) (see Fig.
4). Wherever possible, use the wood screws supplied. If these
are unsuitable, other screws of adequate size and strength can
be used.
Under no circumstances however use countersunk
wood screws, since these can damage the attachment area
(see Fig. 5).
Then screw all four screws fully home, so that the installation kit
is no longer able to come free.
For subsequent disassembly it is sufficient to undo all screws one turn each and to
push the receiver to the right (suspended) or left (on top) to release it.
2
5.6.4 Suspended installation