Kathrein MobiSet 4 CAP 920, Оригинальное руководство по эксплуатации

Страница: 21 / 56

21 from 56
5.6.2 Preparations
5.6.3 Important instructions for installation
Warning
Danger to life from electric shock. Do not use the wood screws that had been included
with the receiver to mount the receiver onto a TV set or other electrical device. The wood
screws could make contact with electrically live parts.
Important
Under no circumstances use countersunk-head screws for installation (see
the diagram on the right), since these can damage the screw sockets on the
receiver. Wherever possible, use the wood screws supplied with the receiver.
Before installing the receiver so that it is attached to another piece of equip-
ment (such as a TV set), check with the manufacturer of that equipment or
by reference to the documentation supplied with it whether this is permissi-
ble, and if so what fittings (screws, etc.) you need / can use for this. The tem
-
perature rise of each of the units in operation (receiver/TV set) can in some circumstances
affect the other unit.
Connections and fusing of the unit
All connection cables for connection to the receiver (including the infra-red sensor) are connected at the rear
of the unit (see also “Connection example” in this section). When selecting the installation location, allow suf
-
ficient clearance at the rear of the unit for these cables and their plugs.
On the left hand side of the receiver viewed from the front there is a fuse inserted from the outside. This fuse
(for the type, see the section “Important Information” in the receiver operating manual) should be accessible
even after the unit has been installed, so that it can easily be exchanged if required.
Attaching the infrared sensor
You can attach the infra-red sensor directly to the unit; or if the receiver
is installed in a concealed location, you should position the infra-red
sensor where it can be clearly seen by the remote control unit.
The infrared sensor is installed with the aid of the supplied adhesive
strip on the flat underside.