Programme selection
16
Timer
The „Timer programming“ menu is called up by pressing the
[
] button. Up to 8 timer events can be alternatively entered
in with TV or radio programmes.
Note:
Keep in mind that the video recorder must be identically set to the
same recording times.
Note:
Please note that remote control commands are not accepted during
timer recording to assure that undesired OSD displays are not re-
corded. The volume is set to the maximum level during a recording.
Once a command is recognised from the remote control, „r E c“ ap-
pears on the programme display on the unit to indicate that a re-
cording is in progress.
The timer recording can only be cancelled prematurely by pressing
the [
] button. After the cancellation, „End“ is displayed. The unit now
operates as normal.
If the timer recording is started in standby, the unit switches back to
standby after the end of the recording.
[1-8]
Select the next open entry field with the numerical buttons
[1]-[8] or with [
▼
] or [
▲
].
[
►
][
◄
] Select the entry field for {Date} {Start} {Stop} and {Pro-
gramme} one after the other (the entry position is highlighted
in white).
[OK]
Activate the entry in the selected field by pressing [OK]
(the entry position is highlighted in black).
Enter in the respective event either directly with the numeri-
cal buttons [0]-[9] or by using the [
►
] [
◄
] buttons.
[OK]
End the entry with [OK] and select the next entry field.
[ E ]
After entering the {Date} {Start} {Stop} and {Programme},
you can confirm the entry and exit the timer menu by press-
ing the [E] button, or enter another event.
E n d
r E c
Содержание Euroline UFE 336S
Страница 2: ......
Страница 5: ...Contents 5 General 33 Reception of encrypted programmes 34 Glossary 35 Technical data 36...
Страница 38: ......
