background image

Preface 

 

 

 

3

Preface 

 

Dear Customer, 

 
The following operating manual will help you obtain the best possible 
use from the extensive features of your new satellite receiver. 
 
We have written this operating manual as comprehensibly as possible 
and as concise as necessary. A brief lexicon containing specialised 
terms not easily translatable has been appended at the end of this 
manual. 
 
We have taken the environment into account with the mains switch. 
Therefore, during longer pauses separate your receiver from the 
mains in order to save energy. During short pauses, you should 
switch the receiver to standby with the remote control, so the least 
amount of energy is consumed. 
 
We wish you a great reception and much enjoyment with your new 
satellite receiver. 

Your, 

KATHREIN-Euroline

 

Team 

 

Important notes

 

 

If you have any unexpected problems with your receiver, please 
contact your specialist supplier. 

 

With regard to the programme allocation of the satellites and trans-
ponders, changes always occur. In such cases, it is necessary to 
carry out new programme settings, even though factory 
pre-programming is always in accordance with the respective latest 
developments. You can gather the details for the new setting from 
teletext on SAT 1, the internet or relevant  magazines. 

Your receiver has been equipped with the latest software 
at the factory. We are always trying to adjust the software to the 
desires of our customers and the state-of-the-art technology. Refer to 
section "Software and programme list update" for more information.

 

 

Please keep the original packaging for the purpose of returning 
the unit! 

 

UFE 335/335S FTA free-to-air programmes only (no CI-slot!)
 
UFE 336/336S CI free-to-air and encrypted programmes 
(diagram on front page) 

 

Содержание Euroline UFE 336S








































Отзывы: