Kathrein Euroline UFE 335, Руководство по эксплуатации

Страница: 28 / 39

Menu structure
28
Activate the desired satellite number, e.g. with the numerical buttons
[1]-[8], and call up the entry menu by pressing the [OK] button.
1. Enter or change the name.
Activate the entry field {NAME} by pressing the [1] button and [OK].
With the [ ▼ ] or [ ▲ ] button, you can select letters (capitalised and
lowercased) or digits.
With the [ ► ] or [ ◄ ] button, you can move the entry position to the
right or left.
After entering the desired name, the entry field is deactivated by
pressing [OK].
2. Enter LO1.
3. Enter LO2.
LO1 and LO2 are pre-set to 9,750 MHz and 10,600 MHz at the
factory.
If the LNB LO frequencies deviate from the pre-set values, you must
enter in the appropriate values here. Activate the field with [OK], and
enter in the LO frequencies with the numerical buttons [0]-[9]. Then
end the entry by pressing [OK].
Please make sure, that a digital-compatible LNB is integrated in your
receiving system.
4. Enter orbit position
Note: The parameter “Orbit position”, possible values 1-4, must be given for
control via DiSEqC.
DiSEqC 1.0 4 sat. positions 1-4
DiSEqC 1.1 16 x 4 sat. positions (uncomitted switches) 1-16/off
As the appropriate switches are required to control DiSEqC 1.1, with
which the matrices are controlled, the wiring is very complicated and
should therefore only be fitted by an experienced electrician!
5. Access
{ON} The selected satellite is released for your receiving system.
{OFF} The desired satellites is locked.